Limestone Entryway Floor in a Loomis Foothills Home

Bright entryway hallway with large-format limestone-look porcelain floor tiles and oak furniture in Loomis foothills home

About This Project

This entryway in a Loomis foothills home was tiled with large-format limestone-look porcelain in a warm cream tone. The home sits on a slab foundation, which made this an ideal application for large-format tile — no subfloor flex to account for, and the concrete slab was in excellent condition after light grinding to remove a residual adhesive from the original vinyl flooring. The tile is 24x24 with a matte finish that reads naturally in the warm, natural-light-filled entry.

The entryway connects to a hallway that runs the length of the home, so the layout was planned to run the tile parallel to the hall axis, creating a visual line that draws the eye toward the rear of the house. The front door threshold was handled with a stainless steel transition strip that separates the tile from the exterior concrete stoop cleanly. Perimeter cuts at the baseboard were made with a wet saw to maintain a consistent reveal below the trim.

What We Did

1

Removed vinyl flooring; ground slab to remove adhesive residue and confirmed flatness

2

Planned layout parallel to hallway axis; dry-laid to confirm perimeter cuts

3

Set 24x24 limestone porcelain directly to slab with back-butter and leveling clips

4

Grouted with warm beige sanded grout; installed threshold strip at front door

Call Us